Cleaning pollutants from water with a defective filter sounds like a non-starter, but a new study shows that right-sized defects help a molecular sieve soak up more perfluorooctanesulfonic acid (PFOS) in less time.
Researchers showed that a highly porous, Swiss cheese-like nanomaterial called a metal-organic framework (MOF) soaked up PFOS from polluted water faster—and held more PFOS when scientists built additional nanometer-sized holes (or defects) into the MOF.
Consumer products like stain-resistant fabrics contained PFOS for decades. The chemical is the best-known member of a family of toxic chemicals called “per- and polyfluoroalkyl substances” (PFAS), which the Environmental Protection Agency describes as “very persistent in the environment and in the human body—meaning they don’t break down and they can accumulate over time.”
“We are taking a step in the right direction toward developing materials that can effectively treat industrial wastewaters in the parts-per-billion and parts-per-million level of total PFAS contamination, which is very difficult to do using current technologies like granular activated carbon or activated sludge-based systems,” says Michael Wong, a professor of chemistry as well as a professor in and chair of the chemical and biomolecular engineering department at Rice University.
Swiss cheese
Wong says MOFs, three-dimensional structures that self-assemble when metal ions interact with organic molecules called linkers, seemed like good candidates for PFAS remediation because they are highly porous and previous applications have shown they can absorb and hold significant amounts of specific target molecules.
Some MOFs, for example, have a surface area larger than a football field per gram, and researchers have documented more than 20,000 kinds. In addition, chemists can tune MOF properties—varying their structure, pore sizes, and functions—by tinkering with the synthesis, or chemical recipe that produces them.
Such was the case with the new PFAS sorbent. Chelsea Clark, a graduate student in Wong’s Catalysis and Nanomaterials Laboratory, began with a well-characterized MOF called UiO-66, and conducted dozens of experiments to see how various concentrations of hydrochloric acid changed the properties of the final product. She found she could introduce structural defects of various sizes with the method—like making Swiss cheese with extra-big holes.
“The large-pore defects are essentially their own sites for PFOS adsorption via hydrophobic interactions,” Clark says. “They improve the adsorption behavior by increasing the space for the PFOS molecules.”
Better adsorption
Clark tested variants of UiO-66 with different sizes and amounts of defects to determine which variety soaked up the most PFAS from heavily polluted water in the least amount of time.
“We believe that introducing random, large-pore defects while simultaneously maintaining the majority of the porous structure played a large role in improving the adsorption capacity of the MOF,” she says. “This also maintained the fast adsorption kinetics, which is very important for wastewater remediation applications where contact times are short.”
The study’s focus on industrial concentrations of PFAS sets it apart from most previously published work, which has focused on cleaning polluted drinking water to meet the current federal standards of 70 parts per trillion. While treatment technologies like activated carbon and ion exchange resins can be effective for cleaning low-level concentrations of PFAS from drinking water, they are far less effective for treating high-concentration industrial waste.
Although an international treaty has heavily restricted PFAS use since 2009, the chemicals are still used in semiconductor manufacturing and chrome plating, where wastewater can contain as much as one gram of PFAS per liter of water, or about 14 billion times the current EPA limit for safe drinking water.
Large-scale production
“In general for carbon-based materials and ion-exchange resins, there is a trade-off between adsorption capacity and adsorption rate as you increase the pore size of the material,” Wong says. “In other words, the more PFAS a material can soak up and trap, the longer it takes to fill up. In addition, carbon-based materials are mostly ineffective at removing shorter-chain PFASs from wastewater.
“We found that our material combines high-capacity and fast-adsorption kinetics and also is effective for both long- and short-chain perfluoroalkyl sulfonates,” he says.
It’s difficult to beat carbon-based materials in terms of cost because activated carbon has been a mainstay for environmental filtration for decades.
“But it’s possible if MOFs become produced on a large-enough scale,” he says. “There are a few companies looking into commercial-scale production of UiO-66, which is one reason we chose to work with it in this study.”
The research appears in the ACS Sustainable Chemistry and Engineering. The National Science Foundation Graduate Research Fellowship Program and the National Science Foundation Nanosystems Engineering Research Center on Nanotechnology-Enabled Water Treatment funded the work.
Source: Rice University
